Hamster of the Month Winner - Sept 2024
Theme: Gotcha Day!
Congratulations, Fluzzyponies and Pickle!
Image
-Pickle-

To see all the Sept HOTM entries click HERE

DIY Hamster enclosure (180 x 50 x 60 cm, wood & glass, sliding doors)

For in depth discussions on cage size, how to build a bin cage, types of bedding, cage accessories, etc
Post Reply
User avatar
lxjshrss
Hamster Guest
Hamster Guest
Reactions:
Posts: 8
Joined: Wed Sep 28, 2022 9:19 am
4
Location: The Netherlands
Total hamsters owned: 7

DIY Hamster enclosure (180 x 50 x 60 cm, wood & glass, sliding doors)

Post by lxjshrss »

Hey folks,

This past summer I decided I wanted to upgrade my hamster enclosure before getting a new furry friend. It measured 120 x 50 x 60 cm (6000 sq cm/~930 sq in) and was basically a big wooden box with a plexiglass front and a mesh lid on top. It had served me faithfully for the past decade, but there were a couple of things that irked me over the years and that I wanted to see fixed in my new enclosure.
Reasons for wanting to upgrade
  • The enclosure was placed on a dresser, totaling its height to just around the height of my armpit. This was annoying because I couldn't easily reach in the enclosure to change things around. I later acquired another larger (and slightly taller) dresser that exacerbated the issue to the point I required a step stool to reach things inside. Apart from the enclosure looking a little silly on a dresser that was quite a bit longer, I really didn't like having to work on top of a step stool. Entering from above was the only way to interact with the hamster, and while it never interfered with the bonding process, I can't say I didn't feel like a predator reaching from above most times.
  • The plexiglass front had warped over the years due to the weight of the bedding. It had also become quite scratched over the years. Nothing that couldn't be fixed by just replacing the plexiglass front, but...
  • Over the seven hamsters this enclosure housed, I've noticed that, while I was always able to provide the necessities, enough enrichment, and a sufficient amount of bedding depth, I felt they would benefit from more space for more enrichment.
All in all, the dresser for underneath the enclosure measured 180 x 50 cm, so that would be the surface area for me to work with. I was fine with the height of 60 cm, so that would result in a 180 x 50 x 60 cm enclosure. My first idea was a glass terrarium with sliding doors, so I started reaching out to people and companies to see if it was possible, as I couldn't find any commercially available enclosures of that size. One couldn't give me a time window as their glass worker was out, another said they didn't make them that large, and the final one was down to work with me, but admittedly was outside of my budget (student). I also then realized that I'm likely to move at least once more in my lifetime, and a glass enclosure is heavy and fragile and I am clumsy.

So, I figured, I built the last one. Why not just build another one myself? How difficult could it be?

I've just installed the last bits of hardware and it's now completely finished, so I'm here to show it off!

Image

Essentially, it's a fancier wooden box that has a nicer finish than my last one. Made using 18 mm thick hardwood (either pine or spruce, I can't recall) plywood sheets, spruce planks for the lid and frame for the lower piece of glass, some mesh for the lid, some staining for a more uniform colour, varnishing to protect from urine and other liquids, aquarium silicone to seal it all up, and some hardware for locks, handles, etc. The handles for the doors are some kind of rubbery material. They're adhering well so far!

All supplies used are 100% hamster-safe. :)
More pics and details
Image Image Image
--
Temporary enclosure inside of the final enclosure. The temp enclosure is where the young ham will live for about two weeks before moving to the larger one, just to ensure they don't disappear completely once arriving here and make taming more difficult, haha.
Image
--
Close-ups on the locks
Image Image Image
I added a lock in the middle of the lid below the handle; when lifting it up, it left a 0.7-1 cm gap that's just enough for a hamster to get their nose or foot caught in. I don't expect a hamster to be able to get there with the interior I have in mind, nor do I expect them to be strong enough to be able to lift it up, but I've also learned not to underestimate their clever fiendishness (or their determination). Adding the lock means that I can't move it while the lid is latched down.
Image
--
The left door (right is identical)
Image
And the overlap between the two sliding panes. I'll still be adding a lock. Again, I don't expect a hamster to be able to slide it out of place by themselves, but I'd rather not be surprised.
Image
Pics of the process
Results of day one. Essentially had all the wood panels cut to size and attached them together. The wood strips are to keep the glass in place without any bedding. Not that the glass was here at this point, but whatever.
Image

Added a lid the next day.
Image

Stained it to be a darker, more uniform colour.
Image

Attached the lid permanently to the back of the enclosure using hinges. I don't expect to need to lift it off completely while doing bedding changes, and I missed the ability to just lift the lid without removing it off the enclosure entirely in my previous enclosure.
Image

A full month later, the glass came in and I was able to attach it to the enclosure. I considered siliconing it in place but refrained from doing that because I'll have to move it at some point in my life and I'd rather be able to just unscrew the wooden frame and take out the glass without too much of a hassle.
Image

Added the profiles for the sliding glass panes. I just glued them down using aquarium silicone. Room smelled of vinegar for the rest of the day. I'd recommend doing it outside if possible, haha. I also siliconed down the inside corners of the enclosure. I hadn't had issues with urine soaking in or hamsters chewing through the edges in my previous enclosure, but I figured I might as well do it while I was at it.
Image

Glass panels for the doors came in a couple of days later, and, apart from the hardware, it was basically finished at this point!
Image
All I'm waiting for now is a lock for the sliding doors. I don't expect a hamster to be able to move them out of place by themselves, but I also wouldn't be surprised if they found a way. Determined little animals, they are. :lol:

Very happy with how this came out. A bunch of firsts in this project. Never worked with glass or silicone, or a staple gun. I really outdid myself, haha.

Next inhabitant is now two weeks old and will be arriving by the end of the month! :)
Love,
Alex

<3 RIP Milo, Theodore, Mimi, Friem, Brum, Frederick, Graham <3
EliHart
Hamster Guest
Hamster Guest
Reactions:
Posts: 1
Joined: Mon Oct 26, 2026 3:31 pm

Re: DIY Hamster enclosure (180 x 50 x 60 cm, wood & glass, sliding doors)

Post by EliHart »

Vielen Dank, das freut mich wirklich! Mir war es wichtig, ein Gehege zu bauen, das nicht nur gut aussieht, sondern vor allem genügend Platz und eine sichere Umgebung bietet. Gerade bei Hamstern sollte man meiner Meinung nach nicht an der Grundfläche sparen. Natürlich steckt einiges an Arbeit und Planung dahinter, aber am Ende lohnt sich die Mühe. Ich bin gespannt, wie sich mein kleiner Mitbewohner darin einlebt. Bei größeren Anschaffungen sollte man übrigens immer gut planen und sein Budget im Blick behalten, genauso wie bei einem Besuch im Casino, wo verantwortungsvolles Spielen bruce bet app wichtig ist.
Post Reply